NEMA 34 Motor 8-5Nm: This size 86mm NEMA 34 hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution) and a body length 118mm. Each phase draws a rated current 6.0A, allowing for a strong holding torque of 8.5Nm.
This CNC kit includes:
1 x 86HS118-6004S : NEMA 34 Stepper Motor Bipolar 1.8deg 8.5Nm 6.0A 86x86x118mm 4 Wires
1 x OK2D872: Digital Stepper Driver 2.4-7.2A 24-110VDC/18-80VAC for NEMA 34 Stepper Motor
NEMA 34 Motor 8-5Nm Specification
- Part Number: 86HS118-6004S
- Step Angle: 1.8deg
- Bipolar/Unipolar: Bipolar
- Holding Torque: 8.5Nm
- Rated Current/phase: 6.0A
- Phase Resistance: 0.79ohms
- Inductance: 5.8mH
- Driving Voltage: 24-72VDC
- Frame Size: 86x86mm
- Body Length: 118mm
- Shaft Diameter: Φ14mm
- Shaft Length: 32mm
- Keyway Length: 25mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 3.8kg
Driver Specification
- Output Peak Current: 2.4 -7.2A(2.0-6.0RMS)
Input Voltage: 24-110VDC/18-80VAC
Logic Signal Current: 7-15mA(Typical 10mA)
Pulse Input Frequency: 0-200kHz
Pulse Width: 2.5μS
Isolation Resistance: 500MΩ
Overall Size
Reviews
There are no reviews yet.