High torque NEMA 14 closed-loop stepper motor has size 35-52mm, equipped with a 1000cpr incremental optical encoder, has a rated current of 1.95 A and a holding torque of 0.4Nm. It offers higher accuracy, higher output torque, higher speed, lower motor heating, lower power consumption, and faster response to drive controllers compared to open loop stepper motors.
Recommend drive: Leadshine CL42C Closed-Loop Stepper Motor Drive
High torque NEMA 14 closed-loop stepper motor Specification
- Part Number: 35AI52EC-1000
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.4Nm
Rated Current/phase: 1.95A
Driving Voltage: 12-24VDC
Frame Size: 35x35mm
Body Length: 68mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Encoder Type: Incremental Optical
Encoder Resolution: 1000CPR
A small tip:
A closed-loop stepper motor is a type of stepper motor that incorporates an encoder to achieve higher precision and performance compared to a traditional open-loop stepper motor.
Overall Size
Motor 4 Leads Connection: A+(Black), A-(Green); B+(Red), B-(Blue)
Encoder 8 Leads Connection: A+(Black), A-(Blue); B+(Yellow), B-(Green), Z+(Brown), Z-(Grey), 5V(Red), GND((White)
If your drive controller don’t support Z signal, then you can leave Z unconnected.
If you need a PDF data sheet, please send an email to: info@frankhumotor.com!
Reviews
There are no reviews yet.