Size 42mm NEMA 17 Closed-loop Stepper Servo Motor 0.9deg 0.44Nm with 1000CPR Encoder

Size 42mm NEMA 17 Closed-loop Stepper Servo Motor 0.9deg 0.44Nm with 1000CPR Encoder

$28.50

In Stock:

5

Model: 42AI48EC-1000M

Weight: 0.6KG

Certificated: ISO, CE, RoHS

Ships From China

5 in stock

NEMA 17 closed loop stepper motor 0.9degree step angle has a size 42-48mm, equipped with a 1000cpr incremental optical encoder, has a rated current of 2.0A and a holding torque of 0.44Nm. It offers higher accuracy, higher output torque, higher speed, lower motor heating, lower power consumption, and faster response to drive controllers compared to open loop stepper motors. Recommend drive: Leadshine CL42C Closed-Loop Stepper Motor Drive

NEMA 17 closed loop stepper motor 0.9degree Specification 

NEMA 17 closed loop stepper motor 0.9degree

  • Part Number: 42AI48EC-1000M
    Step Angle: 0.9deg
    Bipolar/Unipolar: Bipolar
    Holding Torque: 0.44Nm
    Rated Current/phase: 2.0A
    Driving Voltage: 12-24VDC
    Frame Size: 42x42mm
    Body Length: 68mm
    Shaft Diameter: Φ5mm
    Shaft Length: 24mm
    D-cut Length: 15mm
    Encoder Type: Incremental Optical
    Encoder Resolution: 1000CPR

A small tip:

A stepper motor with a 0.9-degree step angle means it rotates its shaft by 0.9 degrees for each electrical pulse it receives. This translates to higher resolution compared to many standard stepper motors which typically have a 1.8-degree step angle.

Overall Size

Motor 4 Leads Connection: A+(Black), A-(Green); B+(Red), B-(Blue)
Encoder 6 Leads Connection: A+(Black), A-(Blue); B+(Yellow), B-(Green), 5V(Red), GND((White)

If you need a PDF data sheet, please send an email to: info@frankhumotor.com!

Reviews

There are no reviews yet.

Be the first to review “Size 42mm NEMA 17 Closed-loop Stepper Servo Motor 0.9deg 0.44Nm with 1000CPR Encoder”

Your email address will not be published. Required fields are marked *

Tag: 0.44nm, 0.9deg step angle, 42-48mm, 42mm encoder motor, nema 17 closed loop

Related Products

  • NEMA 11 Closed-loop Stepper Servo Motor 2A 0.12Nm 51mm

    NEMA 11 Closed-loop Stepper Servo Motor 2A 0.12Nm with 1000CPR Encoder

    $40.00

  • NEMA 11 Closed-loop Stepper Motor 32mm 1A 0.075Nm

    NEMA 11 Closed-loop Stepper Servo Motor 1A 0.075Nm with 1000CPR Encoder

    $40.00

  • NEMA 8 Geared Stepper Motor with Encoder

    NEMA 8 Closed-loop Stepper Motor 0.04Nm with Gear Ratio 5:1 Planetary Gearbox

    $75.00

  • nema-11-closed-loop-stepper-servo-motor-dual-shaft-0-12nm

    NEMA 11 Closed-loop Stepper Servo Motor Dual Shaft 2A 0.12Nm with 1000CPR Encoder & Rear Shaft

    $42.00