NEMA 8 Dual Shaft: This dual shaft size 20mm hybrid bipolar stepping motor has a 1.8° step angle(200 steps/revolution) and body length 38mm. Each phase draws current 0.6A, allowing for a holding torque of 0.04Nm. A length 10mm rear shaft is available. Please note this motor has a 16mm bolt spacing & 15mm pilot circle and more deils can refer to the data sheet of 20AI38-0604B.
NEMA 8 Dual Shaft Stepper Motor Specification
Part Number: 20AI38-0604B
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.04Nm
Rated Current/phase: 0.6A
Phase Resistance: 12.5ohms
Inductance: 5.5mH
Driving Voltage: 12-24VDC
Frame Size: 20x20mm
Body Length: 38mm
Front Shaft Diameter: Φ4mm
Front Shaft Length: 10mm
D-cut Length: 8mm
Rear Shaft Diameter: Φ4mm
Rear Length: 10mm
D-cut Length: 8mm
Number of Leads: 4
Lead Length: 300mm
Weight: 80g
Overall Size
Reviews
There are no reviews yet.
Be the first to review “Size 20mm NEMA 8 Dual Shaft Stepper Motor Bipolar 1.8deg 0.04Nm 0.6A 20x38mm with Rear Shaft” Cancel reply
Reviews
There are no reviews yet.