NEMA 17 Motor IP65: This size 42x48mm NEMA 17 stepper motor has 0.45Nm holding torque with an IP65 waterproof rating, which means this IP65 stepper motor can be fully protected against dust, and also can be protected against low pressure jets if water from all directions and limited ingress permitted. Please note this motor can’t directly work in water but the higher protective level IP68 is fine. Please feel free to contact us if you need higher level IP67 or IP68.
NEMA 17 Motor IP65 Specification
- Part Number: 42HB48-2004S-IP65
- Step Angle: 1.8deg
- Bipolar/Unipolar: Bipolar
- Holding Torque: 0.45Nm
- Rated Current/phase: 2.0A
- Driving Voltage: 12-24VDC
- Protection Grade: IP65
- Frame Size: 42x42mm
- Body Length: 48mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Legngth: 15mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 400g
Overall Size

Reviews
There are no reviews yet.